Understanding Your Car’s Hand Brake: Maintenance and Repair Tips

Understanding your vehicle’s hand brake, also known as the parking brake, is a crucial aspect of car maintenance. Typically, the hand brake lever is positioned between the driver’s and passenger’s seats, and its primary role is to keep your vehicle stationary when parked. However, this important component often gets overlooked in routine car care.

This blog post aims to shed light on the essentials of car hand brake repair and maintenance, helping you ensure the longevity and functionality of your hand brake. Whether you’re a seasoned driver or a beginner, this guide will equip you with the necessary knowledge to keep your hand brake in peak condition.

Call 317-475-1846 For Affordable Car Hand Brake Repair in Indianapolis IN
Call 317-475-1846 For Affordable Car Hand Brake Repair in Indianapolis IN

Maintaining Your Car’s Hand Brake

Regular maintenance is key to keeping your hand brake in good working condition. As a general rule of thumb, you should inspect the hand brake every six months or whenever you take your car for service. Here are some tips and tricks for maintaining your vehicle’s hand brake:

Check the position of the hand brake: The first thing you need to do is to make sure the hand brake lever is in its correct position. When parked, the hand brake should be pulled fully up and engaged at a comfortable height.

Inspect the cables and connections: Over time, the cables that connect your hand brake to the rear brakes can wear out or become loose. Make sure to check them for any signs of damage or looseness and get them replaced if needed.

Check the hand brake fluid level: Some vehicles have a separate reservoir for the hand brake fluid, while others use the same one as the brakes. Either way, it’s essential to check the fluid level regularly and top it up if necessary. Low hand brake fluid can cause your hand brake to fail when you need it most.

Clean and lubricate the hand brake components: Dirt, debris, and rust can build upon the hand brake mechanism over time, causing it to malfunction. Regularly cleaning and lubricating these components can prevent this from happening.

Remember always to refer to your vehicle’s manual for specific maintenance instructions as they may vary depending on the make and model of your car.

Repairing Your Car’s Hand Brake

If you notice any issues with your hand brake, it’s essential to get it repaired as soon as possible. Here are some common problems and how to fix them:

Hand brake not engaging: If the hand brake lever slides too easily or doesn’t stay in place when pulled up, it may be due to stretched cables or a faulty lever mechanism. It’s best to get these components replaced by a professional mechanic.

Hand brake not releasing: On the other hand, if your hand brake is stuck when you try to disengage it, it could be due to rusted cables or frozen calipers. Try gently tapping on the hand brake lever and rocking the car back and forth to release it. If that doesn’t work, seek professional help.

Hand brake warning light: If the brake warning light on your dashboard stays on even when you’ve released the hand brake, it could indicate low fluid levels or a faulty sensor. Get it checked by a mechanic as soon as possible.

Conclusion

Your car’s hand brake is an essential safety feature that should never be neglected. With regular maintenance and prompt repairs, you can ensure its proper functioning and keep yourself and your vehicle safe on the road. Remember to always consult a professional mechanic for any major issues with your hand brake, and never attempt to repair it yourself unless you have the necessary knowledge and experience.

With regular maintenance, you can ensure the longevity and functionality of your hand brake, keeping yourself and your vehicle safe on the road. Contact Northeast Auto Service at 317-475-1846 for professional car brake repair and service in Indianapolis, Indiana. Request a free estimate, or schedule service, today.

Related Posts:

10 Tips for Keeping Your Brakes in Good Condition
Top 4 Signs of Failing Car Brakes
A Guide to Choosing the Right Brake Pads for Your Vehicle

A Guide to Choosing the Right Brake Pads for Your Vehicle

Safety should always be a top priority when it comes to driving, and nothing screams safety louder than well-functioning brake pads in your vehicle. As critical auto parts, brake pads play an indispensable role in your car’s braking system. They help you control your vehicle’s speed, make emergency stops, and keep you safe on the road.

This comprehensive guide is designed to help you navigate the world of brake pads. Whether you’re a seasoned driver or a novice, understanding what makes the best brake pads can give you peace of mind and make your driving experience safer and more enjoyable. Let’s dive in and find out how to choose the right brake pads for your vehicle.

Call 317-475-1846 For Car Brake Pad Replacement in Indianapolis
Call 317-475-1846 For Car Brake Pad Replacement in Indianapolis

Types of Brake Pads

First and foremost, you need to understand the different types of automotive brake pads available on the market. Most vehicles come equipped with either ceramic or metallic brakes pads, though other options are available as well, such as semi-metallic brake pads.

Ceramic Brake Pads: Ceramic brake pads offer a softer touch when braking compared to metallic brake pads. They are great for long-term durability and offer superior noise reduction when braking.

Metallic Brake Pads: Metallic brake pads provide maximum stopping power under extreme conditions such as downhill braking or heavy loads on your vehicle. These brake pads tend to be noisier than ceramic ones but will last longer in the long run.

Semi-Metallic Brake Pads: Semi-metallic brake pads are a hybrid of ceramic and metallic brake pads, offering a combination of the performance benefits of both materials.

Factors to Consider When Choosing Brake Pads

Now that you understand the different types of brake pads available, there are some key factors to consider when choosing which ones are best for your vehicle.

Material: The type of material a brake pad is made from will determine its performance and longevity. Ceramic, metallic, and semi-metallic pads all provide different levels of braking power and noise reduction depending on the situation. It’s important to consider how often you use your brakes and what type of environment they are in when making this decision.

Fit: Different brake pads come in different sizes and are specifically designed to fit certain makes and models of vehicles. Be sure to measure the brake pad’s dimensions before purchase to ensure a proper fit for your vehicle.

Durability: The durability of a brake pad depends largely on its material, but it is also important to consider the manufacturer as well. Check reviews and ratings online before making your purchase to get a better idea of how long a particular brake pad is expected to last.

Price: Brake pads can range anywhere from a few dollars per set up to hundreds depending on the type and manufacturer. Be sure to compare prices between different brands to find the best deal for your budget.

Maintenance Tips

Once you’ve chosen the right brake pads for your vehicle, it’s important to maintain them properly. This includes cleaning and lubricating the brake calipers regularly as well as inspecting the brakes for any signs of wear or damage. It’s also a good idea to check the contact surface of the brake pad for any irregularities that could affect braking performance.

Finally, never forget to check your brakes for any signs of wear and tear before heading out on the road. This could include any unusual noises, vibrations, or increased stopping distances when applying the brakes. These are all signs that it may be time to replace your brake pads.

In Summary

Now that you have a better understanding of how to choose the right brake pads for your vehicle, you can be sure of a safer and more enjoyable ride. Follow these tips and you’ll be well on your way to staying safe on the road.

Are you looking to replace your brake pads soon? Get the best deals at Northeast Auto Service. Contact us at 317-475-1846 for professional car brake service and repair in Indianapolis, Indiana. Don’t forget to check out our automotive service coupons too!

Related Posts:

10 Tips for Keeping Your Brakes in Good Condition
Top 4 Signs of Failing Car Brakes
How to Inspect Your Car Brakes

How to Know When it’s Time to Replace Your Car Brakes

Maintaining your car is an important part of keeping it running smoothly and safely. One of the most essential maintenance tasks you can do on your vehicle is to regularly check and replace its brakes. Knowing when it’s time to replace or repair your vehicle’s brakes can be tricky, as there are several signs that indicate a need for brake work.

To ensure that your car remains safe to drive, here are some tips on how you can know when it’s time to replace or repair your car brakes.

Call 317-475-1846 For Car Brake Replacement in Indianapolis Indiana
Call 317-475-1846 For Car Brake Replacement in Indianapolis Indiana

Average Cost of Car Brake Replacement

Car brake replacement is an essential part of maintaining the safety and functionality of your vehicle. When it comes to the cost, the average price of replacing brake pads and rotors on a car can vary depending on the make and model of the vehicle. On average, the cost can range from $150 to $600 for a brake pad replacement, and around $300 to $800 for a rotor replacement. However, keep in mind that additional expenses may occur depending on the state of your brake calipers, brake lines, and brake fluid. Regularly checking and servicing your brakes can save you money in the long run and give you peace of mind while on the road.

How to Tell If You Need to Replace Your Car Brakes

Listen for Unusual Noises: One of the most common signs that your brakes need attention is if you hear a squealing noise when braking. This is usually caused by worn brake pads and should be addressed immediately.

Check Your Brake Fluid Level: If you notice that your brake fluid level has decreased, it could mean that your brake lines are leaking or need to be bled. You should have this checked out as soon as possible if this happens.

Pay Attention to How Your Car Feels When Braking: If you feel any vibrating or pulsing while braking, it means that there might be an issue with your car’s rotors or drums. You should have them inspected and replaced if necessary to ensure your car’s safety.

Notice if it Takes Longer to Stop: If you find that your car takes longer than normal to stop, it could be a sign that your brakes need attention. This could indicate that there is an issue with the brake system or that the pads are wearing out and need to be replaced.

Inspect Your Brakes Visually: You should periodically inspect your brakes visually for signs of wear and tear such as rust, cracks, or even damage caused by debris. If you notice any of these signs, it’s time to have them checked and/or replaced.

By paying attention to these warning signs, you can help ensure that your car is safe on the road and prevent any further damage to your brakes. Regular brake maintenance is essential for car safety, so make sure to have your brakes checked and replaced when necessary. Doing so can save you from costly repairs down the line.

Ask a Mechanic When in Doubt

Always keep in mind that it’s important to have a qualified Indianapolis auto shop mechanic check out any problems with your brakes before attempting any DIY repair or replacement. It’s best to stay safe by having a professional take care of any issues as soon as possible.  With proper care and regular maintenance, you can be sure that your brakes will remain functional and reliable for many years to come!

Conclusion

Knowing when it’s time to replace or repair your vehicle’s brakes can be tricky, but keeping an eye out for the warning signs can ensure that you get your brakes fixed before they cause any major damage. Regularly checking your brake fluid level, listening for strange noises, noticing how your car feels when braking and inspecting your brakes visually are all important steps to take in order to maintain the safety of your vehicle. Be sure to have a qualified mechanic in Indianapolis inspect and replace any worn parts so that you will be safe on the road. With proper care and attention, you can be sure that your car brakes will last for many years!

Are you worried that your vehicle’s braking system is in need of some immediate TLC? Contact Northeast Auto Service at 317-475-1846 for professional car brake repair and service in Indianapolis, Indiana. Request a free estimate, or schedule service, today.

Related Posts:

10 Tips for Keeping Your Brakes in Good Condition
Top 4 Signs of Failing Car Brakes
How Often Should I Bleed My Car Brakes?

10 Tips for Keeping Your Brakes in Good Condition

Are you looking for ways to keep your car’s brakes in good condition? If so, you’ve come to the right place! Proper brake maintenance is essential for safe driving and avoiding costly repairs. Here are 10 tips to help you keep your brakes in top shape throughout the year.  From regular inspections and fluid changes to checking brake pads and rotors, these easy-to-follow steps will ensure that your vehicle has reliable braking power whenever you need it.

So, read on for some useful advice about keeping your brakes in great condition!

Call 317-475-1846 For Car Brake Service in Indianapolis Indiana.
Call 317-475-1846 For Car Brake Service in Indianapolis Indiana.

Top 10 Ways to Take Good Care of Your Car Brakes

1. Get Regular Brake Inspections: An easy way to make sure your brakes are in good condition is to have them regularly inspected by a mechanic or technician. A qualified professional will be able to detect any potential problems with your brakes before they become serious and expensive repairs.

2. Change Your Brake Fluid: Changing your brake fluid regularly is one of the most important maintenance steps you can take. Brake fluid absorbs moisture over time, which makes it less effective at stopping your car. Be sure to keep up with this simple but important step for optimal brake performance.

3. Check Your Brake Pads: Another important part of maintaining your brakes is to check the brake pads. If they become too worn, it’s time to replace them. This will help reduce friction and wear on your rotors, which can save you money in the long run.

4. Check Your Rotors: The rotors are what allow your car’s brakes to stop quickly and effectively. Over time, the rotors can become warped or damaged due to wear and tear. If this happens, it’s important to have them replaced as soon as possible to avoid any costly repairs down the line.

5. Clean Your Brakes: Regularly cleaning your brakes will help keep them in good condition by removing dirt, dust, and other debris that can build up over time. This simple step will ensure your brakes are always working their best.

6. Check for Leaks: Checking for leaks in your brake lines is essential to maintaining optimal brake performance. If any leaks are detected, they should be repaired immediately to avoid any further damage or costly repairs.

7. Check for Vibrations: If you feel any vibrations or pulsing when applying your brakes, it could be a sign that something is wrong. This could be caused by worn brake pads, warped rotors, or loose parts. Have a mechanic inspect your brakes if this happens to ensure everything is in good condition. 

8. Avoid Sudden Stops: It’s important to avoid making sudden stops in order to protect your brakes from excessive wear and tear. Make sure to give yourself plenty of distance between you and the car in front of you so you can brake gradually when needed.

9. Don’t Drag Your Brakes: Dragging your brakes can cause unnecessary wear and tear. This happens when you keep your foot on the brake pedal after slowing down to a certain speed, instead of releasing it completely. Make sure to take your foot off the brake when you’re not applying pressure in order to avoid any premature damage.

10. Don’t Ignore Warning Signs: If your car is making any strange noises or behaving oddly when you apply the brakes, it’s time to get them checked. Ignoring warning signs can lead to more serious problems in the future, so be sure to take your car in for a brake inspection at the first sign of trouble.

Good Brake Care Will Ensure Safer and More Enjoyable Driving

Following these tips can help keep your brakes in optimal condition, allowing you to enjoy worry-free driving and avoid costly repairs. Be sure to stay on top of brake maintenance so that you can feel confident your car will respond when you need it to.  Speak with a licensed auto mechanic for personalized advice about car maintenance.

Are you looking for a dependable automotive mechanic for help with your car or truck issues? Contact Northeast Auto Service at 317-475-1846 for professional brake repair and automotive service and repair in Indianapolis, Indiana. Request a free estimate, or schedule service, today.

Related Posts:

3 Auto Care Services to Ensure Brake Performance and Longevity
Why Did My Brake Warning Light Come On in My Car?
How to Use Engine Braking to Extend the Life of Car Brakes

Top 4 Signs of Failing Car Brakes

It’s no secret that driving can be dangerous. But did you know that being a safe driver doesn’t just mean being a good driver? It also means keeping your car in good condition. That’s right – making sure your car is regularly serviced and that you keep up with basic maintenance can go a long way towards keeping you safe on the road.

Of course, there are other factors that contribute to safe driving, but maintaining your car is a good place to start. So, if you’re looking to be a safer driver, don’t forget about your car! One of the most important areas of focus are the car brakes. After all, you need them to stop and control the speed of your vehicle!

How are your car brakes doing? Could they use some service or repair? Do you need car brake replacement? Continue below to learn the top 4 signs of failing car brakes, plus where to get trusted and affordable car brake repair near you.

Car Brake Repair Indianapolis Indiana 317-475-1846
Car Brake Repair Indianapolis Indiana 317-475-1846

4 Common Car Brake Problems

One of the most important components of your car is the brakes. Without them, you wouldn’t be able to safely stop your vehicle. That’s why it’s so important to be aware of the signs of failing car brakes. By catching brake problems early, you can avoid a potentially dangerous situation and keep your car running smoothly.

Here are four signs that your car brakes may be failing:

❶ Your brake pedal feels spongy or soft when you press it. This is often a sign of air in the brake lines, which can reduce the effectiveness of your brakes.

❷ You hear squealing or grinding noises when you brake. This can indicate that your brake pads are worn out and need to be replaced.

❸ Your car takes longer than usual to stop. If your brakes are losing their effectiveness, it will take longer for your car to come to a stop.

❹ Your brake warning light is on. This is usually an indication that there is something wrong with your brakes and you should have them checked by a professional as soon as possible.

If you notice any of these signs, it’s important to have your brakes checked out by a qualified car mechanic in Indianapolis. Ignoring brake problems can lead to serious accidents and injuries, so it’s always better to be safe than sorry.

The Link Between Car Care and Brake Maintenance

It is well known that driving safely is the number one priority on the road. But what many people don’t realize is that car maintenance is just as important in keeping you safe on the road. A properly maintained car will have tires with good tread, good fuel functionality, functioning lights, and most importantly, brakes that work effectively. This minimizes the chances of you getting into an accident. It is also important to have your car regularly serviced at a licensed Indianapolis auto repair shop so that any potential problems can be caught early on. This way, you can avoid breakdowns or other issues that could put you in danger while driving. So, remember that safe driving starts with a well-maintained car. Make sure to take care of your vehicle and it will help keep you safe on the road.

Are you looking for professional and affordable brake service near you? Contact Northeast Auto Service at 317-475-1846 for ASE-licensed car brake service and repair in Indianapolis, Indiana. Check out our auto shop coupons, too!

Related Posts:

How to Inspect Your Car Brakes
Why Did My Brake Warning Light Come On in My Car?
How to Use Engine Braking to Extend the Life of Car Brakes

5 Reasons Why Your Car is Shaking

Cars are meant to move in all sorts of ways, but shaking, vibrating, and bobbing are not considered normal in terms of conventional automotive performance. If your vehicle is showing any signs of odd movement like shaking, it is important to diagnose the problem and resolve the issue before any more damage results.

Continue reading to learn the top 5 reasons why your car might be shaking, plus where to get dealership level automotive service and repair at neighborhood prices.

Auto Service  Indianapolis Indiana 317-475-1846
Auto Service Indianapolis Indiana 317-475-1846

Why Does Your Car Have the Shakes?

Car shaking and vibrating are not symptoms you should ever ignore. In most cases, such movements are indicative of a serious underlying mechanical problem. Other times, it can be something simple like uneven tire tread wear. Regardless of why your car is shaking, it is important that you take it into your local Indianapolis mechanic as soon as possible to diagnose and resolve the issue. The longer you wait to repair whatever it is causing your car to shake or vibrate, then the worse your vehicle’s condition will get. This means costlier and more invasive repairs.

Whether the vibrating and shaking are happening intermittently, or every single time you drive, you can help your mechanic diagnose the issue by recounting when the shaking takes place. Does your car shake when you’re in idle? Does it shake intermittently as you drive? Does your car shake when you start the vehicle but then stops shaking as you begin to drive? Do you hear any odd sounds when your car begins to shake? Have you been in an accident recently, even a minor one like running over a squirrel? This is all important information that your mechanic will need to know in order to efficiently diagnose the issue and facilitate the needed repair.

5 Common Causes for a Shaking Car

Although there are many reasons why a car might be shaking and vibrating, the top 5 reasons typically involve issues with the wheels, tires, engine, or steering and suspension system. These are the areas your mechanic will focus on first as they begin the process of deciphering the issues causing your car shakes.

Tires

As mentioned earlier, sometimes cars will begin shaking if they have low or uneven tire tread. Imbalanced tires can also cause cars to shake. You might just need routine tire service to correct the issue, such as rotation and alignment, tire inflation, or tire replacement.

Wheels

If you can feel the shaking beneath your feet coming up through the floorboards, particularly at higher speeds near 50 miles an hour, the wheels could be to blame. A routine wheel balance should set you straight. However, it could be due to loosen lug nuts or broken wheel bearings, which are both easy and inexpensive to repair.

Steering and Suspension

Your steering and suspension system are responsible for keeping your car steady as you drive over rough terrain. If something is mechanically off within your steering and suspension, such as a bent axle, damaged CV joint, or faulty driveshaft, your car may begin to bounce or bobble as you drive when you reach higher speeds. Although much different from shaking and vibrating, this is still a problem that needs immediate attention.

Engine

If your car begins to shake when you are stopped in idle, it is likely due to mechanical issues within the engine. In most cases, spark plug replacement is the solution. Other than spark plugs, car shaking could be caused from dirty or clogged air filters, loose motor mounts, or disconnected spark plug wires.

Brakes

Car shaking can also present itself when the car brakes are engaged. If your car begins to shake or vibrate when you press down on the brake pedal, the issue could likely be due to worn-out brake pads or warped brake rotors. If you smell a burning order when you hit the brakes, you could have a brake caliper that’s stuck. All of these issues can be resolved with the help of a licensed mechanic.

Are you looking for a qualified automotive repair shop in Indy to resolve your car shaking issue at an affordable price? Northeast Auto Service at 317-475-1846 for superior, ASE licensed auto repair and service in Indianapolis, Indiana. We service all make and model vehicles.

Related Posts:

How to Detect Automotive Failure With Your Ears
Strange Car Smells and What They Might Mean
Have Your Car Suspension Inspected If These Facts are True About You

How to Use Engine Braking to Extend the Life of Car Brakes

If you haven’t heard of a car care strategy known as engine braking, you will be glad you came across this blog. Extending the components and systems within your vehicle ultimately extends its life. And engine braking will contribute to this objective. Continue below to learn what engine braking is, why it is beneficial, and most importantly, how to do it!

Car Brake Repair Indianapolis Indiana 317-475-1846
Car Brake Repair Indianapolis Indiana 317-475-1846

Engine Braking Basics

How do you reduce your speed when driving? You use the brake pedal, of course! Pressing on the brake is the go-to instinct of all drivers who want to slow their vehicles down or come to a stop. But did you know that routinely pressing the brake can impact your car’s performance and safety? Fortunately, there is more than one way to brake. Enter engine braking.

Engine braking is a driving technique that slows your car down by simply releasing your foot from the brake pedal, then shifting the gears down, one by one. This can be done in both manual and automatic transmission vehicles.

In a manual transmission vehicle, after you take your foot off the brake, keep it off, and then shift down through each gear until it is time to stop completely or gas back up. In automatic vehicles, release your foot from the pedal, then let the car slow down on its own. It is not recommended to use engine braking too often in automatic transmission vehicles.

Benefits of Engine Braking

Engine braking is an easy-to-do driving strategy that can extend the life of your car brakes and improve your vehicle’s overall efficiency. How does it work? In plain language, engine braking limits the amount of airflow sent to the engine, which causes the engine to decrease the speed of the wheel revolutions. There are many more benefits of engine braking. It reduces the rate of wear and tear on your car’s braking system and engine, especially in the case of long descents down steep roads or hills. Engine braking also increases your fuel economy, giving you better gas mileage. And, although not entirely true for automatic vehicles, engine braking is not harmful to your manual transmission so long as you do not let the RPMs go close to or above the red line on the dashboard gauge.

How to Engine Brake Safely

Engine braking is more than just taking your foot off the brake pedal and down shifting through each gear. There are some other good driving practices you must follow to protect your engine and transmission.

First, never shift down to a low gear when you are still driving fast. High speeds are not conducive to safe engine braking at low gears.

Also, it is very important to go through each gear. Avoid skipping a gear, as this can put a lot of strain on your transmission and engine.

Last, engine braking is a great driving tool, but not one to be overused. Too much engine braking can have adverse effects on your car.

Are you looking for professional car brake repair or maintenance in Indy? Contact Northeast Auto Service at 317-475-1846 for professional, ASE-licensed car brake repair in Indianapolis, Indiana. Check out our auto shop coupons, too!

Related Posts:

How to Inspect Your Car Brakes
Here’s How to Tell if Your Transmission is Failing
How to Detect Automotive Failure With Your Ears

How to Detect Automotive Failure With Your Ears

While driving, one might hear nothing but the purring of their car engine and the clicking of their turn signal. But there are times when a person can experience another set of noises they have never heard before; or ones that certainly startle. Such noises are not desirable, as they may portend the certainty of repairs and maintenance work ahead. But not to worry; most car noises, like thumping, crackling, grinding, and squeaking, are perfectly resolvable. The first step is to diagnose the cause of the noise or noises, and there are three very common noises that are related to a number of common repairs.

Continue reading to learn the top 3 most common car noises, how to listen for them, and what they might mean in terms of auto repair and service.

Engine Repair Indianapolis IN 317-475-1846
Engine Repair Indianapolis IN 317-475-1846

Car Noises That Indicate a Problem

Metal Grinding

If you are hearing metal on metal grinding sounds coming from somewhere in your car, this could possibly be the brakes.  Brakes are made up of balanced parts, each with a particular path that allows them to harmoniously work together toward a common goal of stopping the car. If any of these parts are worn or off-set, it can create noises that sound like grinding. This means your car is probably in need of some new brake pads, or possibly even some new rotors. It is always best to have a certified technician take a look to be sure what the catalyst for the noise really is. 

Aggressive Clunking

If you are suddenly hearing a heavy thumping or clanging sound coming from your vehicle, there is no telling whether or not it’s a serious or complex repair without further investigating some areas. These sounds could be occurring for a number of reasons, such as worn out or broken joints on a drive shaft and bad shocks. On the minor side, sometimes you just have something really heavy in your trunk and you keep hitting bumps on the road. Check your trunk, and if it turns out that’s not the issue, contact an auto repair shop to investigate further for you.

Whistling Engine Noise

This is not like the whistle of a train or trolley, but more like a hissing sound seeping out of your engine.  Sometimes this sound is followed by heavy steam coming from the engine and can even last after the car is turned off. The root of the whistling can be a variety of reasons, from cooling system leaks to overheated engines. Again, it is best to check with a professional to diagnose the issue accurately.  You do not want to risk a faulty repair job on your only means of transportation!

Concerned about the noises and sounds coming from your car or truck? Contact Northeast Auto Service at 317-475-1846 for engine repair and scheduled car maintenance in Indianapolis, Indiana you can afford. We also offer auto service coupons and discounts!

Related Posts:

Have Your Car Suspension Inspected If These Facts are True About You
How to Tell if You Need to Replace the Spark Plugs in Your Car
How to Diagnose a Weak Car Engine

Indianapolis Auto Repair Service
Indianapolis Auto Repair Service 317-475-1846

Why Did My Brake Warning Light Come On in My Car?

Although the check engine light is the usual suspect, your vehicle is equipped with all sorts of other indicator lamps and warning sensors. One such indicator lamp that can switch on when something’s off is your car’s brake warning light. Continue reading to learn more about brake warning lights, including why yours is illuminated and what you can do to resolve the underlying issue.

Car Brake Service Indianapolis IN 317-475-1846
Car Brake Service Indianapolis IN 317-475-1846

Brake Warning Lights Versus Bulb Checks

have most vehicles come with one brake warning light on the dashboard, but other vehicles may have to break warning lights on the dashboard. When you first turned the ignition in your car, all life in your dashboard should flash as a test, also referred to as a bulb check, to ensure that the electrical system is operating properly. So, do not panic if you see the break warning light appear as you start your car.

Keep in mind that if the break warning light does not illuminate when you start your car, you could have a bulb out. In this case, you would simply need to bring your car into local Indianapolis automotive repairs shop to have the break warning light bulb replaced. However, if the break warning light remains illuminated as you drive, it is important to diagnose the issue.

Top 2 Causes for an Illuminated Car Brake Warning Light

So, why is your brake warning light on right now? Well, it could be due to a variety of brake-related reasons. However, the two primary reasons why brake warning lights come on have to do with the emergency brake and brake fluid pressure.

Emergency Brake – If the emergency brake is on in your vehicle, your car sensor system will illuminate the break warning light. All you have to do to resolve this problem is to turn your emergency brake off. However, if the brake illumination continues it could be due to brake fluid and pressure problems.

Brake Fluid and Pressure – If one half of your braking system loses pressure, your brake indicator lamp will switch on. Solving this issue is more complex than turning off the emergency brake. In most cases, you’ll need to bring your car into a licensed Indianapolis mechanic to have the issue diagnosed and resolved.

Car Brake Pressure Repair is an Automotive Emergency

If your car’s braking system is low on pressure, it is not safe to drive your vehicle. If you do drive your vehicle this condition, it is important to use the emergency brake when you do park the car. Brake pressure should be equal on both sides of your braking system, so if one side loses a bit of pressure, it can lead to hazardous driving conditions. Brake pressure loss typically occurs as a result of a leak in the system or low hydraulic fluid.

Anti-Lock Braking System Lights

Most modern-day vehicles are designed with anti-lock braking systems, which appears as a “ABS” on the dashboard. If your anti-lock braking system light illuminates on your car’s dashboard, it could mean that there is an underlying problem. When this happens, you are still safe to drive your vehicle, but your anti-lock braking will not work. It is still important to bring your car into a local Indianapolis auto shop to have it repaired.

Are you looking for a skilled and qualified mechanic to help you with your automotive brake maintenance and service needs? Contact Northeast Auto Service at 317-475-1846 for dealership-level car brake repair in Indianapolis, Indiana at economy-friendly prices. We offer coupons and discounts, year round!

Related Posts:

How to Inspect Your Car Brakes
The Types of Brakes in Cars and Trucks
3 Auto Care Services to Ensure Brake Performance and Longevity

Indianapolis Auto Repair and Service
Indianapolis Auto Repair and Service 317-475-1846

Strange Car Smells and What They Might Mean

Sure, your car smells funny sometimes. But when it is not coming from last night’s fast food or that gym bag that’s been sitting in the back seat since Sunday, those smells could indicate a real problem. Continue reading to learn the most common types of car odors and which type of automotive problems they may signify.

Indianapolis Auto Safety Inspection and Service
Indianapolis Auto Safety Inspection and Service 317-475-1846

Common Car Smells

Car odors like burning rubber, burning wood, sulfur, gasoline, hot oil or exhaust, mold or mildew, and sweet smells are common types of odors that indicate an automotive problem or need for repair. Here are the reasons why these odors might be apparent in your vehicle right now, and what you need to do to resolve the issue:

BURNING

If you smell burning rubber, it could mean that your brake pads are worn down, or your tires are being overworked. If you detect burning wood smells, it could mean that your clutch is malfunctioning.

SULFUR

Sulfur is often described as smelling like rotten eggs. If you smell sulfur like odors in your vehicle, the most likely culprit is overcharging your car battery. Otherwise, it could be from a defective catalytic converter or even an issue with your fuel system.

GASOLINE

Unless you’ve accidentally spilled on yourself after filling station, if you are smelling gasoline in your car, is most likely a leak in your fuel tank. It could also be from a failing component within your evaporator emissions system.

HOT OIL/EXHAUST

If you are smelling hot or burning oil, or a smell similar to exhaust, it is most likely caused by an oil leak in your engine. Typically, this is from a defective gasket or seal.

MOLD OR MILDEW

Moldy or mildew odors in your vehicle are typically associated with air conditioning problems. Moisture or water can get trapped inside the inner components of your PC, and after some time begin to develop mold and mildew growth. These odors could also be caused by a buildup of moisture inside of your car, or because your cabin air filter is old.

SWEETNESS

If you are smelling sweet sugary cells in your car, it is often indicative of a coolant leak. Coolant is also known as radiator fluid, and it is on the most vital automotive fluids for all vehicles.

If you are detecting any strange odors or noises within your vehicle, it is important to have them looked at right away. Contact Northeast Auto Service at 317-475-1846 for professional automotive service and repair in Indianapolis, Indiana. Request a free estimate, or schedule service, today.

You Should Also Read:

Why You Should Get an Auto AC Tune Up Right Now
Common Signs That Indicate Which Car Repair You Need
How to Smell a Car Problem

Indianapolis Auto Repair Service
Indianapolis Auto Repair Service 317-475-1846